www.CoolFlatRoof.com – Thin film, peel + stick, Solar PV panels: Easy and Quick installation. www.coolflatroof.com – Learn how to design and install solar PV panel on residential and commercial buildings. Roof – integrated Solar Flat Roof from IB Roofs Building-integrated solar flat roofs are cool, green and have the lowest cost/watt to install, and virtually no maintenance cost. IB makes Lifetime residential flat roofing and now they together with Uni-solar have the only real BI-PV solar flat roof system for your home or business. Find out more at www.CoolFlatRoof.com Benefits of thin-film solar and Roof integrated IB Solar-Wise PV systems include better than average light capture in cloudy conditions, minimum roof penetrations, no shading from adjacent panels, and combined 30% federal tax credit for both the Solar and the roofing system. Your roof integrated solar array will be the most cost effective installation for any flat roof.
Video Rating: 4 / 5
Cu(InGa)Se2 Based Thin Film Solar Cells (Thin Films and Nanostructures) 
This book gives a valuable content particularly on the fabrication of chalcopyrite based thin film solar cells. The characterizati…
Wide-Gap Chalcopyrites Chalcopyrites, in particular those with a wide band gap, are fascinating materials in terms of their technological potential in th…
The Sun, believed by the mankind to be just a mere centerpiece of the solar system in which we live is in reality not just a unit …
The main problem is if you don’t tilt your panel and leave them on the floor, everytime it’s rainning or the wind blow, you will have a lot of stuff on your panel reducing the efficiency.
I am not sure you want to go on the roof every 3 days to clean them.
Installation is something, maintenance an other.
you just read your bullet points asshole 2 thumbs down
I had the same problem. But then I went to these guys: TILE-MOLDS . com . They provide the best roof materials!
is all the same but different
I heard there were some problems with the OpenEnergy Solar PV panels. UniSolar works great!
does it work as well as the panels??
This product has been enhanced and licensed to SunTech and will be available through them early 2010
That’s truly amazing! I slashed my electric bill in half! look here: solar.xfollow.me (Copy to your browser’s address bar)
well, nano solar is a mfg of thin film pv that is essentially printed onto metal substrate…
as for AC or DC – all solar panels produce DC electricity which usually goes into an inverter and becomes AC …
sorry to ask, but does nano solar gives AC or DC current?
Ja packt Euch das aufs Flachdach!!Und selbst wenn die Zellen das durchhalten,ist das Abdichtmaterial nach 20 Jahren am Ende…viel Spass bei der Sanierung danach,und bei der Sondermüll entsorgung….
I am wondering how well they will hold up in a hail storm or if tree branches land on then? How easily do they break?
If you talk to solar integrators, you will learn that they hate the roofing part of the installation. Remember that panels must be attached to a roof, otherwise the wind will knock them down. This “attachment” usually results in a leak, which can be avoided by using roof-integrated solar system.
Think of it as regular UniSolar thin film panels for low slope roof.
It has lower efficiency per sq. ft., but is much better at catching light on a cloudy day.
Best thing about IB SolarWise is that you have a choice to use other Solar panels. The main benefit is the complete integration of Solar PV and Roofing membrane. The end result give you a leaks free roof and well performing solar array and you won’t need to replace the roof in 5 years.
This looks great. Does it perform well?
Just as a note: In this video, the solar panels are from Open Energy. The company operantly stopped manufacturing those panels for some reason.
IB produced this video before they actually released SolarWise.
IB has just released and is now selling IB SolarWise that uses proven Uni-Solar thin-film laminates. Actual product looks slightly different, and comes in rolls vs. sheets as seen in the video.